AGP Picks
View all

REDCOM wins Army prototype work on vehicle audio adapter

Oct. 29, 2026
By AI, Created 15:19 UTC, Oct 29, 2026, AGP -

REDCOM Laboratories has been selected to develop a prototype VICTORY Audio Adapter for the U.S. Army’s CMFF transport project, part of the service’s Next Generation Command and Control modernization. The adapter is designed to let legacy vehicle audio gear work with CMFF digital radio systems without replacing installed intercoms, headsets and handsets.

Why it matters: - The Army is trying to modernize vehicle communications without stripping out decades of installed audio equipment. - The VICTORY Audio Adapter is meant to bridge legacy analog audio systems and CMFF digital radio architecture inside military vehicles. - The effort supports the Army’s Next Generation Command and Control, or NGC2, transport modernization.

What happened: - REDCOM Laboratories, Inc. was selected by the U.S. Army to develop a prototype multi-waveform VICTORY Audio Adapter, or VAX, for the CMOSS Mounted Form Factor, or CMFF, C2 Transport project. - REDCOM received an Other Transaction Agreement with Consortium Management Group, Inc. on behalf of Consortium for Command, Control and Communications in Cyberspace on July 14, 2026. - The announcement was dated October 29, 2026, from Victor, New York.

The details: - Army vehicles still rely on legacy audio gear, including intercom systems, crew headsets and push-to-talk handsets. - CMFF shifts radio voice functions onto a modern digital card-based architecture. - The VAX is designed to sit between those systems and make them operate as one. - The adapter will provide bidirectional audio and push-to-talk signaling across up to four analog interfaces at the same time. - The adapter will use the VICTORY Streaming Audio interface. - Each interface can be assigned to a separate CMFF radio voice net. - The design lets crews use software-defined radio capability without removing the vehicle’s existing audio equipment. - The prototype will support Single Channel Ground and Airborne Radio System, or SINCGARS. - The prototype will support Very High Frequency and Ultra High Frequency Line of Sight / Air Traffic Control, or VULOS/ATC. - The prototype will support Warrior Robust Enhanced Network Tactical Scalable Mobile Ad-Hoc Network, or WREN-TSM. - The prototype adapts REDCOM’s fielded radio interoperability technology to a CMFF-compatible form factor. - REDCOM Sigma XRI already connects IP and RF endpoints and bridges disparate radio systems in deployed environments worldwide. - The Army’s FY 2027 budget documentation identifies CMFF and VAX development as part of modernization of the NGC2 C2 Transport Layer. - That documentation describes CMFF as a cornerstone of a more agile, interoperable and data-centric communications backbone for ground and aviation platforms.

Between the lines: - The award suggests the Army wants modernization that preserves compatibility with legacy hardware instead of forcing a full vehicle rewrite. - REDCOM’s pitch centers on using existing interoperability technology and repackaging it for the Army’s modular vehicle architecture. - The company is positioning the VAX as a practical application of open standards, not just a standards-compliance exercise. - Courtney Stiles, executive director of customer activities at REDCOM, said success for CMFF depends on delivering a solution that works for the warfighter.

What’s next: - REDCOM will develop the VAX prototype under the agreement. - The Army’s broader CMFF and NGC2 modernization work is expected to continue through the FY 2027 budget cycle and beyond. - REDCOM says the VAX extends VICTORY’s open architecture to vehicle audio.

The bottom line: - The prototype aims to let Army crews keep using existing vehicle audio gear while moving to a more modular digital communications stack.

Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.

Sign up for:

New Products Digest

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.

Share this page:

Advanced Search Options

Search for:

Search scope:

Type:

Search in:

Date range:

The last

Sort by:

Sign up for:

New Products Digest

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.